(4.0-16.0)mm×2200mm Slitting Line
This thick plate slitting line, also called metal coil slitter, is able to slit thick steel master coil into small baby coils. The thick coil slitting line is composed of: coil-loading car, double mandrel big-load uncoiler, portal style coil-head guide, press and shovel equipment, double roller pinching feeder, five-roller leveler, end-cutter, Roll table, Central aligner, Disc slitter, scrap winder, hole accumulator, pre-separator& tensioner, Portal style coils-separator and presser, recoiler, coil unloading car, hydraulic control, and electric control.
Capacity of different models of thick sheet slitting lines (metal coil slitter):
Strip thickness: (3~12) mm, (4-16)mm, (5~20) mm;
Strip width: 500-1800mm, 800~2000mm or 1000~2200mm.
Advantages and Characteristics of Coil Slitting Machine:
1. For thick sheet slitting machine, strength and solidity is very important. We take much attention to metal coil slitter's structure design and coil slitting machine's material usage, for example: portal style coil-head guide and press, dual-body scrap reeler, five-roller tensioner for recoiling, portal-style coils pressing & separating bracket, etc.
2.Double cone-mandrel decoiler, not only to bear big coils such as 35T or 40T, but also convenient for loading coil onto the decoiler.
3.Coil-loading car has support platform with twp rotatable rollers at edge edges, while loading coil onto double-cone decoiler, on one hand, solidly support a big coil; on the other hand, double rollers on coil car platform rotate synchronously with decoiling mandrel.
4.Strength of all rollers and shafts increase with steel strip thickness.
5.Dual-body scrap winders are driven by two torque motors and two speed reducers.
6.Recoiling tensioner of the metal coil slitter, or sheet slitting line,adopts solid five-roller tensioning structure, providing stable and even tension for recoiling.
7.Coils pusher is installed on recoiler, to push coils out whiling discharging slit coils.
8.AC motors and speed reducers drive pinch-feeder & five-roller leveler and five-roller tensioner, while DC motors & speed reducers drive slitter and recoiler.
9.Coil slitting machine's electric control: Eurotherm 590 speed controller + PLC control.
Coil-loading — Single-mandrel uncoiling — Coil-end-feeding & shoveling — Double-roller pinch feeding/three-roller leveling — End-cutting----Hole Accumulator 1 — Strip-aligning----Disk shearing — Scrap reeling — Hole Accumulator 2 — Pre-separator / Tensioner — Separating, Recoiling — Coils-discharging — Hydraulic control — Electric control
|- Material to be processed||Material of coils: HRC, CRC, GI, ST37, ST52, S235, S355|
|- Yield strength||Max. 235Mpa|
|- Material thickness||4.0~16.0mm|
|- Slitting width||800~2200mm|
|- Slitting Motor||200KW DC Motor|
|- Slitter shaft||360 x 2250mm|
|- Slitting piece||Max.20 strips|
|- Recoiling Motor||250KW DC|
|- Line Speed||Max.40m/min|
|- Raw coil weight||40,000kg|
|- Min. slit width||100mm|
|- Total power||480kW|
|Model||Thickness||Width||Coil Weight||Finished slit width||Max Slitting speed|
|ZJ-12 x 1800||3-12mm||600-1800mm||Max 35T||Min. 60mm||50m/min|
|ZJ-16 x 2200||4-16mm||800-2200mm||Max 40T||Min. 100mm||40m/min|
|ZJ-20 x 2000||5-20mm||800-2000mm||Max 40T||Min 100mm||30m/min|
We always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content line from us.
For more information about coil slitting machine, please send us inquiry.
Contact Person: Mr.Zhao