pipe mill life longer method
Want to make the machine last longer, not only to buy good quality, but also to play a very important role in the later maintenance. pipe mill manufacturer told The following small series will give you a few tips on the maintenance experience of the pipe making machine.
1.Always check the oil level on the fuel tank. The oil level should not be lower than the specified value.
2.When the fine oil filter is blocked by dirt, it needs to be replaced in time; when the coarse oil filter is blocked, it should be cleaned in time, once every 3 months.
3.To add oil to the fuel tank, it must be filtered. The oil should not be mixed with impurities such as moisture, rust, metal shavings and fibers.
4.When starting the oil pump in winter or cold area, it should be opened and stopped, repeated several times to increase the oil temperature, and then start working after the hydraulic pump station is running flexibly.
5.All the knobs on the hydraulic pump station, non-operators should not move.
6.Always observe if the power supply voltage is abnormally fluctuating and check it every 3 months or so.
Stainless steel pipe machine is mainly used for the continuous molding process of stainless steel and carbon steel (round pipe, square pipe and special-shaped pipe) for decoration and industrial use. After unwinding, forming, welding, grinding, sizing, straightening, fixed length and cutting Produced by other processes.
Industrial pipe is to add more internal leveling, bright annealing, etc.
Scope of application: stainless steel security doors and windows, stair railings, automobile exhaust pipes, muffler tail pipes, marine pipes, food sanitary pipes, fluid pipes, water pipes, compression stainless steel pipes, heat exchangers and other stainless steel pipes.
Process characteristics: continuous production, high efficiency, less material waste, and low production cost.we are pipe mill manufacturer, you can know it.
Contact Person: Eason Bian
Tel: 86-18034562377
Fax: 86-311-666-32007