The tube mill has the characteristics of strong adaptability to materials, continuous production, large crushing ratio, easy adjustment of the fineness of the milled product, and can be produced either dry or wet, or at the same time as grinding and drying.We are tube mill supplier and the best tube mill supplier,you can know it.
It is mainly used for the grinding of finished products and raw materials in cement plants. It is also suitable for industrial and mining enterprises such as metallurgy, chemical industry and electric power to grind various ores and other grindable materials.
Working principle editing
The material enters the inside of the tube mill barrel through the feeding device and falls into the initial grinding position of the tank. When the cylinder rotates, the grinding medium and the material are lifted and lifted to a certain height with the friction and centrifugal force, and then dropped or slid down at a certain linear velocity, and the material is subjected to falling steel balls. Impact with bulk material, with additional crushing and abrasion between steel balls and steel balls, between steel balls and mill liners, between materials and materials, and between materials and steel balls and liners And it was crushed.
After the material is crushed and ground through a warehouse, the particle size becomes smaller. The smaller particles are transported to the second bin through the screening and lifting action of the double compartment, and continue to be ground by the smaller grinding medium, which is slowly under the action of the material pressure. Flow to the discharge end.
When it reaches the discharge end, it has been ground to a very fine particle size, and after screening of the discharge raft, the fine powder of the qualified particle size is forcibly discharged from the discharge mill to the next process.